Zoeller - Drain Pump Series 105/135

This is our most versatile water collection system. No need to dig a sump pit or re-route plumbing drain lines. This compact system includes everything you need to remove water from areas without gravity drains. Excellent for bar sinks, laundry trays or condensate removal. There are no inlet filters to clean, and easy compression fittings make for quick and trouble-free installations. As an added bonus, the P-trap can be located inside the tank if necessary.

FEATURES:
  • 100% factory tested and pre-assembled
  • Quick & easy installation
  • Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
  • Compact design
  • May be installed with internal trap for space savings
  • Handles fluid temperatures up to 54°C (130°F)
  • Durable cast iron pump with non-clogging vortex impeller passes lavatory lint (no strainer)
  • Stainless steel hardware
APPLICATIONS: 
  • Laundry tray pumps (fits under a single or double tub)
  • Wet bar sink
  • Lavatories
  • Condensation removal
  • Residential diswasher and garbage disposal water removal
  • Dehumidifier units
OPTIONAL:
  • Available with a type E/F (5 or 10 m), G (10 m) or I (5 m) plug.

EASY INSTALLATION - NO NEED TO DIG A SUMP

INCLUDES:
  • Automatic cast iron pump with tank, cord seals and hardware
  • Basin and gas-tight cover
  • Internal discharge pipe to lid (trap supplied by others)
  • Check valve (model 105: 30-0181; model 135: 30-0102)

Technical Information

MODEL 105 FEATURES:
  • 16 liter (4.2 gal.) polypropylene tank
  • Model 53 pump
  • Upper and lower sleeve bearings
  • Passes 12 mm (½") spherical solids
  • DN40 (1½") drain inlet (top or side); DN50 (2") NPT vent; DN40 (1½") NPT discharge
  • DN40 (1½") or DN32 (1¼") slip x slip union "full flow" PVC check valve (30-0181)
  • 3 m (9') cord (other cord lengths available upon request)
  • Shipping wt. 16 kg. (35 lbs.)
  • Max head: 4.7 m (15.5')
  • Max. flow: 10.1 m3/hr (44 GPM)
BASIN FEATURES:
  • Corrosion-resistant
  • High capacity
  • Gas-tight lid
  • DN50 (2") NPT vent
  • 1½" NPT discharge
  • DN50 (2") NPT inlet - (model 135)
  • DN40 (1½") drain inlet side or top (model 105)
  • Threaded connections for easy installation
  • Temperature rated 54°C (130°F)
MODEL 135 FEATURES:
  • 23 liter (6 gal.) polyethylene tank
  • Model 152 pump
  • Upper sleeve bearing and lower ball bearing running in a bath of oil
  • Passes 19 mm (¾") spherical solids
  • DN50 (2") NPT drain inlet (side); DN50 (2") NPT vent; DN 40 (1½") NPT discharge
  • DN40 (1½") solvent weld, "full flow" PVC check valve (30-0102)
  • 6 m (20') cord (other cord lengths available upon request)
  • Shipping wt. 22 kg. (48 lbs.)
  • Max head: 9.8 m (32')
  • Max. flow: 13.4 m3/hr (59.2 GPM)

Basin Dimensions